A powder diffraction quantification method (ALJOR) for atmospheric particulate matter

The percentage calculation of crystalline phases in atmospheric particulate matter samples by means of an adiabatic approach of the matrix-flushing method with preferred preparations that avoids preferential orientations, should never be interpreted as absolute values. On the contrary, it should be seen as an indicator of the significant differences between each and every analyzed sample. Factors such as the application of constants, which are only useful for preparations of polycrystalline samples free of preferential orientation, and/or like the deficient resolution shown by the diffraction diagrams for certain phyllosilicate phases, bring a high degree of uncertainty to these percentage calculations. An alternative method of crystalline and amorphous phase quantification is presented below. Once the majority phases in the samples were identified, appropriate pure phases corresponding to each of them were selected. Then, the corresponding calibration curves were built using corundum (number 676 NIST) as a reference pattern phase. After validating the obtained calibration curves, the constants corresponding to each phase and selected spacing were calculated. The ALJOR method has been used for the quantification of five samples.     

U–Pb evidence for a polyorogenic evolution of the HP–HT units of the NW Iberian Massif

. A isotope dilution thermal ionisation mass spectrometry U-Pb geochronological study was carried out on the high-pressure and high-temperature units (HP-HT units) overlying the oceanic suture in the Allochthonous Complexes of the NW Iberian Variscan Belt. The rocks investigated are seven granulite- to eclogite-facies paragneisses and one leucosome within mafic high-pressure granulites in the Ordenes and Cabo Ortegal Complexes of NW Spain. U-Pb dating of zircon, monazite, titanite and rutile reveal the presence of a pervasive Early Ordovician metamorphic event at ca. 500-480 Ma and a later Early Devonian event at ca. 400-380 Ma. The U-Pb ages, in conjunction with petrological and structural data, indicate that the high-pressure event recorded by these rocks is Early Ordovician in age. Monazite ages in the paragneisses suggest that peak metamorphic conditions were reached at ca. 500-485 Ma. Subsequently, the rock ensemble underwent exhumation accompanied by partial melting and zircon growth at ca. 485-470 Ma. Melting of mafic granulites was coeval with this latter episode as indicated by zircon crystallisation age in the leucosomes dated at ca. 486 Ma. Based on these data and on the general features of magmatism and metamorphic evolution, it is proposed that this process took place at a convergent plate boundary within a peri-Gondwanan oceanic domain. Monazite, titanite and rutile data in some of the samples studied show evidence of a second metamorphic episode that took place between ca. 400 and 380 Ma (with a peak at ca. 390-385 Ma). This Early Devonian event, at variance with the previous one, was not pervasive, but, rather, was localised in areas of intense Variscan tectonothermal reworking. It is claimed that this later metamorphic event was recorded by the U-Pb system in areas where monazite and titanite growth was enhanced by fluid circulation in highly strained rocks (Variscan shear zones). According to previous structural studies and Ar-Ar dating of fabrics, this Early Devonian episode took place as the HP-HT units were deformed and thrusted upon the ophiolitic units in the early stages of the Variscan collision.     

Al hematites prepared by homogeneous precipitation of oxinates: material characterization and determination of the Morin transition

A novel method for synthesis of aluminium hematites, based upon the homogeneous precipitation of Fe and Al oxinates in various proportions, is presented. The precursor precipitates are heated in air at 700?°C. X-ray diffraction, thermal analyses, BET, FTIR, optical reflection analysis, TEM and Mössbauer spectroscopy at room temperature and 80?K of the resulting products indicate that single-phase hematites are formed with structural Al substitution of up to 10 at%. Interestingly, the particle size (>100?nm) is not substantially reduced by the Al content. Although it remains difficult to obtain a homogeneously distributed Al substitution in the final hematite, this processing line offers a unique opportunity to separate the effects of grain size and Al substitution on the Morin transition temperature (T _M) of Al hematite. From the comparison between the present hematites and a series of Al-substituted hematites with lepidocrocite as precursor, it could be shown that the effect on T _M, associated with a change of a factor 10 in grain size, is about 1/3 of the effect caused by a change of 10 in the degree of substitution. Finally, it is suggested that proper thermal treatments under different conditions of the same precursors are likely to produce spinel phases.     

Spatial and temporal variation of the nekton and hyperbenthos from a temperate European estuary with regulated freshwater inflow

The aquatic macrofauna of the Guadalquivir estuary were sampled (1 mm mesh persiana net) at 5 sampling sites located along the entire (except the tidal freshwater region) estuarine gradient of salinity (outer 50 km). A total of 134 fish and macroinvertebrate species was collected but only 62 were considered common or regularly present in the estuary. Univariate measures of the community structure showed statistically significant differences among sampling sites: species richness, abundance, and biomass decreased in the upstream direction, being positively correlated with the salinity. Temporal differences of these three variables were also statistically significant. While a clear seasonal pattern (minimum densities in winter and maximum in spring-summer) was observed for abundance and biomass, no such pattern existed for the number of species. Mysids was the most dominant group throughout the estuary (96% to 99% of abundance; 49% to 85% of biomass), although fish biomass was also important at the outer estuary (36% to 38%). Multivariate analyses indicated highly significant spatial variation in the macrofaunal communities observed along the salinity gradient. These analyses suggest that the underlying structure was a continuum with more or less overlapping distributions of the species dependent on their ability to tolerate different physicochemical conditions. There were also significant temporal (intermonthly + interannual) variation of the estuarine community; the relative multivariate dispersion indicated that monthly variation was more considerable (relative multivariate dispersion >1) at the outer part of the estuary during the wet year (last 20 km) and was higher in the inner stations during the dry year (32 to 50 km from the river mouth). Since a clear negative exponential relationship was observed between the freshwater input (from a dam located 110 km upstream) and water salinity at all sampling stations, it is concluded that the human freshwater management is probably affecting the studied estuarine communities. While the higher seasonal (long-term) stability of the salinity gradient, due to the human control of the freshwater input, may facilitate the recruitment of marine species juveniles during the meteorologically unstable early-spring, the additional (short-term) salinity fluctuations during the warm period may negatively affect species that complete their lifecycle within the estuary.     

An estuarine benthic index of biotic integrity for the Mid-Atlantic region of the United States. II. Index development

A benthic index of biotic integrity was developed for use in estuaries of the mid-Atlantic region of the United States (Delaware Bay estuary through Albemarle-Pamlico Sound). The index was developed for the Mid-Atlantic Integrated Assessment Program (MAIA) of the U.S. Environmental Protection Agency using procedures similar to those applied previously in Chesapeake Bay and southeastern estuaries, and was based on sampling in July through early October. Data from seven federal and state sampling programs were used to categorize sites as degraded or non-degraded based on dissolved oxygen, sediment contaminant, and sediment toxicity criteria. Various metrics of benthic community structure and function that distinguished between degraded and reference (non-degraded) sites were selected for each of five major habitat types defined by classification analysis of assemblages. Each metric was scored according to thresholds established on the distribution of values at reference sites, so that sites with low scoring metrics would be expected to show signs of degradation. For each habitat, metrics that correctly classified at least 50% of the degraded sites in the calibration data set were selected whenever possible to derive the index. The final index integrated the average score of the combination of metrics that performed best according to several criteria. Selected metrics included measures of productivity (abundance), diversity (number of taxa, Shannon-Wiener diversity, percent dominance), species composition and life history (percent abundance of pollution-indicative taxa, percent abundance of pollution-sensitive taxa, percent abundance of Bivalvia, Tanypodinae-Chironomidae abundance ratio), and trophic composition (percent abundance of deep-deposit feeders). The index correctly classified 82% of all sites in an independent data set. Classification efficiencies of sites were higher in the mesohaline and polyhaline habitats (81–92%) than in the oligohaline (71%) and the tidal freshwater (61%). Although application of the index to low salinity habitats should be done with caution, the MAIA index appeared to be quite reliable with a high likelihood of correctly identifying both degraded and non-degraded conditions. The index is expected to be of great utility in regional assessments as a tool for evaluating the integrity of benthic assemblages and tracking their condition over time.     

Seismic Hazard Estimate at the Iberian Peninsula

—?Seismic hazard at the Iberian Peninsula has been evaluated by using a methodology which combines both zonified and non-zonified probabilistic methods. Seismic sources are used when considering zones where certain calculation parameters may be considered homogeneous, as in zonified methods, while, on the other hand, earthquakes are considered wherever it has taken place, as in non-zonified methods. The methodology which is applied in this paper has been originally used to calculate the seismic hazard maps in the United States. In our case, it has been necessary to adapt the method to the specific features of the seismicity in the Iberian Peninsula and its geographical surroundings, not only with respect to its distribution and characteristics, but also with respect to the properties of the seismic catalog used.¶Geographically, the main feature of the result is the fact that it reflects both historical seismicity and current seismic clusters of the region. Despite the smoothing, maps show marked differences between several seismic zones; these differences becoming more noticeable as exposure time increases. Maximum seismic hazard is found to be in the southwestern region of the Peninsula, especially in the area of the Cape St. Vicent, and around Lisbon. The uncertainty of the results, without considering that due to the attenuation laws, as deduced from the other evaluation parameters, is quite stable, being more sensitive to the parameters b and m _max of the Gutenberg-Richter relation.     

Rock magnetic evidence of inflation of a flood basalt lava flow

The anisotropy of magnetic susceptibility (AMS) of lava flows is an innovative method which has been proved to be directly related to the shear history of lava. One of the advantages of this method is that it can be used in the absence of other morphological features commonly employed to study the mechanism of emplacement of lava flows. This feature of the AMS method makes it very attractive to gain insight into the mechanism of emplacement of massive, relatively featureless, long lava flows such as those forming flood basalt provinces. In this work, we report the results of the measurement of AMS as a function of vertical position within the Birkett lava flow, one of the Columbia River Basalt Group flows. The observed variation of AMS allows us to identify at least 16 discrete events of lava injection and to estimate the thickness of individual injection events. The AMS-estimated thickness of each injection event (in the range of 0.5-4.0 m) coincides with the range inferred for injected lava pulses in modern Hawaiian lava flows. Thus, the evidence provided by the AMS method supports the notion that at least some flood basalt lava flows were emplaced by the same mechanism as many present-day inflated pahoehoe flows. Regarding the orientation of the principal susceptibilities, in the central part of the flow they define a preferred orientation along an E-W trend, whereas in the outer parts of the flow they have a NNE-SSW trend. This difference in the orientation of the principal susceptibilities is interpreted as the result of a change of flow direction of the lava as emplacement progressed. Electronic supplementary material to this paper can be obtained by using the Springer LINK server located at http://dx.doi.org/10.1007/s00445-002-0203-8.     

Upper Oligocene-Lower Miocene shallowing-upwardlacustrine sequences controlled by periodic and non-periodic processes(Ebro Basin, northeastern Spain)

The lacustrine facies from two sections (Candasnos and Fraga) ofthe Oligocene-Miocene Torrente de Cinca lithostratigraphic Unit in thecentral part of the Ebro Basin (Spain) have been analysed to determine theinfluence of orbital parameters in lacustrine sedimentation. The unit ispredominantly composed of limestones and marls, and represents a shallowlacustrine freshwater system. The sedimentological features of the faciesstudied demonstrate that the lower part of the Candasnos section representsoffshore lacustrine subenvironments whereas the upper part, and the whole ofthe Fraga section, characterise marginal lacustrine areas. Series of stratalthickness variations of limestone, marl, and limestone/marl couplets fromboth sections have been analysed using spectral analysis. This shows thatinformation corresponding to periodic cycles only appears in the offshorefacies, that is to say, in the lower part of Candasnos section, and disappearsin the marginal facies where non-periodic cycles exist. Furthermore, thespectral analysis of the offshore facies highlights the existence of a peak inthe power spectrum with a period of around 7 (6.8 to 7.8) that can berecognised in the field as shallowing-upward lacustrine sequences.Magnetostratigraphic data from the Candasnos section allow us to establish atime span of 2,808 years for the limestone/marl couplet from the lower partof this section, and between 19,000 and 22,000 years for the periodic cycleidentified, thus representing the climatic precession cycle. Shallowingsequences from marginal areas do not correspond with any periodiccycle.     

Estimates of lichen growth–rate in northern Sweden

Two lichenometric techniques were compared in a study of lichen growth–rate in northern Sweden. The first technique, based on the maximum lichen diameter on glacier moraines, was identical to the technique used in the 1970s, whereas the other utilized the lichen diameter measured on 100 randomly selected boulders. The results indicate that it does not matter which technique is chosen, as long as the technique is used consistently on both the calibration surfaces and the surfaces to be dated. The use of data from both the 1970s and the 2000s increased the number of calibration surfaces available. The new calibration curve indicates that the age of Little Ice Age moraines was underestimated by up to about 30 years in the study conducted in the 1970s.